Intelligent Fiber Optic Cable Splicing Machine 60db Return Loss
AV6471 Fusion Splicer
AV6471 is an optical fiber splicing device with a brand new design.
With powerful functions and super low splicing loss, it is highly
competent for construction of trunk lines and FTTx.
Lightweight and compact, it is easy to use even in confined space.
The novel fiber imaging system makes the image clearer.
The real-time embeded Operating System provides a friendly
man-machine interface and abundant functions.
The built-in large capacity Li-Ion battery can support long-time
field work.
The real-time compensation system for temperature, humidity and air
pressure has greatly enhanced the
device against unfavorable environment changes and thus guarantees
its consistency of low loss splicing
in various environments.
Specifications:
- New fully-digitalized design;
- Small in size, lightweight: only 2.8kg with battery;
- Takes only 8 seconds for splicing,25 seconds for
pyrocondensation;
- Can set automatic start of splicing or of pyrocondensation upon
close of the cover;
- Simultaneous display of X/Y axis; zoom in up to 304 times
original size;
- Real time discharging for adjustment; no need for further
adjustment;
- Electrode has a long life; discharging times up to 4000;
- With USB and VGA ports;
- 5.7 inch digital high resolution LCD;
- Precise real-time display of remaining battery capacity;
- Built-in high capacity battery, which enables up to 220 times of
splicing and heating;
HD Optical Image Acquisition System
ο HD aligner for double separate optical fibers
ο High performance CMOS sensor
ο Sensor pixels 640*480
Len Imaging Optical Fiber Aligning System
ο Fast evaluation of fiber profile
ο Precise fiber alignment
ο Precise evaluation of splicing loss
Real-time Discharging Correction System
ο High performance discharging electrode
ο AC-DC mix discharging technique
ο Current feedback and environment compensation
Typical Application:
AV6471 Fiber Splicer is mainly applied in fiber cable construction,
fiber line maintenance, emergency repair of fiber cables and tests
and production of optical fiber components.
Technical Parameter:
Indent Information:
Main body: AV6471 Fiber Splicer
Standard equipment:
| Applicable | SM, MM, DS, NZDS |
| Fiber cleaved length | 8-16mm |
| Fiber diameter | Cladding diameter: 80-150um; coating diameter: 100-1000um |
| Oprate mode | Automatic ,semi-automatic ,manual |
| Fiber aligning method | Advanced PAS alignment mode |
| Average Splice Loss | 0.02dB(SM),0.01dB(MM), 0.04dB(DS), 0.04dB (NZDS) |
| Typical splicing time | 9 second with standard SM fiber |
| Return loss | >60dB |
| Fusion program | 12 (templet), 188 (user) |
| Tube typical heating time | 30 second |
| Protection sleeve length | 60mm, 40mm |
| Storage of splice result | 5000 results, 3 parameter per result |
| Tension test | 2N |
| Fiber magnification | Vertical dual display, 304 times magnification; level of dual
display, 152 times magnification |
| Electrode life | 4000 |
| No. of splice/ heating with battery | Typical 130 cycles |
| External interface | provide USB and VGA ports |
| Display screen | 5.7 inch 640*480 color LCD monitor |
| Power Supply | Built-in lithium battery 11.1V; externaladapter,input: AC100-240V,
output: DC13.5V/4.5A |
| Heat shrinkable tube | 60mm,40mm and other series of tube |
| Operating condition | 0-5000m above seal level, -10~50ºC, max wind velocity of 15m/s |
| Dimension | 150(D)x150(w)x160(H)mm |
| Weight | 2.8KG including battery |
